місце зберігання | Germany |
виробник | OSTERBERGER |
опис | HP4S200-PLC - very high quality hydraulic PLC-controlled column press, single cylinder universal press with 2,000 kN nominal pressing force, useful table size / usable ram plate size or passage between the columns 1,250 x 1,000 mm - table height approx. 750 mm, installation height 600 mm (optional 800 mm), guided press ram due to four pieces of ground and hardened columns - therefore the ram plate can also be loaded off-center, oil cooler, decompression valve for a quick return flow of the hydraulic oil from the press cylinder into the oil tank, adjustable pressure switch, two-hand release, piston rod stroke range 0 to 500 mm. Approach speed 42 mm / sec. - pressing speed 7 mm / sec. - Return speed 70 mm / sec., Front light barriers to protect the front press room, drive power 15 kW, dimensions 1.5 x 1.3 m x H 2.7 m, weight approx. 4,500 kg. BOSCH / REXROTH proportional valves for the regulation of the ram speed and the pressing pressure - the regulation takes place via two rotary knobs, including the possibility to set the approach speed of the press ram and the pressing speed
SIEMENS PLC - control with touch screen KTB 700 Basic, for the storage of up to fifty programs - choice between PLC operation and manual operation, press ram position measurement by encoder, pressure monitoring by measured value converter, the following can be programmed:
Die cushion with 300 kN pressing force - die cushion area 430 x 290 mm - die cushion stroke range 250 mm - four times guided - bores for receiving the drawing ram - safety valve for emptying the drawing cushion cylinder, front door with electrical monitoring, rapid traverse speed downwards 125 mm / sec. - |
стан | Новий від заводу |
рік побудови | 2020 |
машина годину | 0 |
Машина під потужністю | да |
CNC - Maschinentechnik
Hauptstraße 93
2384 Breitenfurt bei Wien
контакт: Wolfgang ECKER