Використані машини: Машини для обробки дроту

Two identical fully automatic winding machines are available. Both were overhauled by the manufacturer 4 years ago.
max. linear mechanical speed: 35m/s, max. compressed air pressure: 7bar.

Technische Daten:
Draht-ø: 0,05 - 16 mm
Drähte: 1
Max. Einzugshub pro MS-Drehung: 100 mm
Teilelänge: 5 - 6000 mm
Stk/Min: max. 2000

Ausstattung:

Cable length: 45-1000mm, number of pieces: 1-999,999, stripping length: 0.1-120mm right and 0.1-45mm left, stripping length: 999.9mm on both sides, feed speed: 0.14-1.68m/s, cable cross-sections: AWG ...

Clamping surface: 1700x950mm, table dimensions: 600x200mm, feed: 600mm, length: 3500mm, width: 2200mm, height: 1150mm, shafts front side: 5 each top/bottom, including 7x slides, 2x welding control DTW ...

With documentation, without accessories, an on-site inspection is possible.

Ref.Nr.: INNO26448

Single/ dual wire diameter: 6-16/ 6-12mm, max. bending speed: 1200°/s, connected load: 22kW, length: 4100mm, width: 1300mm, height: 1650mm, weight: 4.75t, with documentation.

Ref.Nr.: ...

There are one Somavis T-8K and one T-8L available, max. working diameter: 6mm, max. shaft length machine 1/ 2: 80/ 100mm, output: 200-600/min.

Ref.Nr.: INNO15816

Catalog No. : 7154
Type: SPV
Producer: Bongard
Made in: 1981
Characteristic:
Wire diameter: 6.5 mm
Maximum coil weight: 1000 kg
Inner diameter: 520 ...

Two Bihler reels are available, without documentation, an inspection is possible.

Ref.Nr.: INNO26067

Two multiple drawing machine Breitenbach Standard 4-III/8 are available, inlet/finished diameter: 3/ 0.8-1.5mm, drawing speed: 2-8m/s, weight: 11.17t, machine 2 is in the same design as machine 1, but ...

Number of coil carriers: 12, rotor speed: 450/min, coil volume: 550cm³, wire tension: 1-16N, pitch: 5-90mm, connected load: 5kVA, with documentation, is already dismantled.

Ref.Nr.: ...

Suitable for stainless steel wire: 1.4301, 1.4310, 1.4401, wire diameter: 0.25-0.5mm with a strength up to 2400 N/mm², working speed: 75-80m/min, temperature range: 400-650°C, suitable for four ...

Number of spooling positions: 2x 6, number of take-off pulley drives: 1 group drive, number of layings: 1 group laying, wire diameter: 0.15-0.3mm, bore diameter 22mm, winding speed: 20-120/min, max. ...

With Measuring, Control and Sorting Machine Schenker MR 20 and Wire Reel SR 50.

Ref.Nr.: INNO25336

Catalog No. : 4861
Type: LT8
Producer: ADIGE
Made in: 2011
Characteristic:
Control system: Siemens ADIGE
Total hours: 51218 h
Hours on: 34560 h

Catalog No. : 6587
Type: A04B-0239-B032
Producer: Fanuc
Made in: 1990
Characteristic:
The machine is in a good technical condition.

Outer spring diameter: 5-16mm, wire thickness: 0.5-1.3mm, angle ratio: 6-18, max. throughput: 65/min, with documentation.

Ref.Nr.: INNO24694

Including documentation.

Ref.Nr.: INNO22627

length of reeling-pattern 0
internal dia. of stator 0
packet hight 0 mm
wire dia. 2,5 mm
working area 45 x 1650 mm
total power requirement 5 kW
weight of the ...

The machine is a rewinding machine for producing cables, with radial force measuring axes Honigmann, including documentation.

Ref.Nr.: INNO24361

Wire range: 3-6mm, speed: 60-80/min, max. coil weight: 1t.

Ref.Nr.: INNO24128

Max. cable/ tubing diameter: 76.2/ 9,5mm, diameter: 23,200/h.

Ref.Nr.: INNO23484

Fine wire winding machine
Manufacturer: Aumann
Type -unknown-
380V

Keep in mind that the advertisement was translated automatically and may have errors. We are not ...

Also suitable for processing flat steel, including documentation, without accessories, machine was scarcely used.

Ref.Nr.: INNO22234

Max. coil weight: 10t, controls: SIEMENS S5, without documentation.

Ref.Nr.: INNO21279

Max. speed: 360m/min, power: 5.6kW.

Ref.Nr.: INNO21074

Wire straightener and cutting Maschine with a with run-out-table (10m)
with beanding head
and a pick-up-loader (automatically moveable)
System: roller straightener

Includes the following machines of a mill (1) Molassing Machine (2) Bag Beating Machine BAUMGARTEN (3) Inclination Scale SECA, max. load: 150kg (4) 2x Filler KIEKIENS CYCLOON (5) Hammer Mill TIETJEN ...

There are three identical SCHENKER FA-10T available, wire diameter: 0.2-1mm, max. spring diameter: 10mm, leg length: 50mm, windings: 0-70, capacity: 8-83 pieces/min, year of construction: 1974, 1975, ...

Max. diameter: 12mm, shaft length: 440mm, wire section: 465mm, output: 30-40 pieces/min.

Ref.Nr.: INNO15814

There are two WAFIOS FTU 2 available, wire diameter: 0.5-2mm, leg length: 80x120mm, coiling mandrel diameter: 20mm, coiling spindle path: 90mm, output: 70 springs/min.

Ref.Nr.: INNO12734

Wire diameter: 1-3.2mm, spring diameter: 9-28mm, spring length: 25-150mm, capactiy: 8-25springs/min, with winder Wafios FUD 41, eyeletting machine Wafios FOS 3.

Ref.Nr.: INNO12735