опис | workpiece diameter 125 mm
grinding depth 50 mm
clamping length 2000 mm
total power requirement 0,5 kW
weight of the machine ca. 1000 kg
dimensions of the machine ca. m
T E C H N I C A (Switzerland)
Centre Hole Grinding Machine
Model ZSM 5100 – 2.000
Year approx.. 1975 S / N 66 32 7872 – J 3278
_______________________________________________________
Distance between centres 50 – 2.000 mm
Height of centres approx. 125 mm
Workpiece ? in clamping Vice 8 – 125 mm
Swing of workpiece over tailstockguide 290 mm
Swing of Workpiece max. over grinding head pillar 300 mm
Max.weight of workpiece 250 kg
Max. centre hole taper ? 2 – 50 mm
Max. centre hole taper angle 60 ?
Clamping range of vice approx. 5 – 160 mm
Grinding head adjustable in vertical axis 160 mm
Stroke of grinding tool on workpiece 0.75 – 5 mm
Grinding tool ? 15 – 60 mm
Grinding spindle speeds 13,000 – 45,000 rpm
Total electrical load, approx. 1 kW - 380 V - 50 Hz
Weight, approx. 1.000 kg
Accessories / Special Features
Machine is suitable for workpiece length up to 2.000 mm
with a basement extension
* A cone shaped grinding wheel is employed, but it is only in line contact
with the centrehole surface, in addition it is reciprocating
simultaneously along this line.
The workpiece remains stationary, enabling the generation of perfect
centre holes.
* To clamp cylindrical Workpieces one uses a height adjustable 2 jaw vice
which gives three point contact and always coincides with the center of
the grinding spindle.
* Height-adjustable workpiece centering vice with carbide inserts.
Manual adjustment of appropriate workpiece diameter with clamping screw.
* Dressing device, mounted on the side of the grinding spindle, stroke
approx. 40 mm, for producing a geometrically exact conical form and with
oscillation of diamond tool.
* Pre-centering device for Workpiece adjustment between centers.
* Pneumatic Oil Lubrification of grinding spindle by oil-mist.
* Manually adjustable Tailstock with handwheel but without motorized drive.
Condition : Good to very good. Machine can be inspected under power.
Delivery : Ex stock, as inspected
Payment : Net, after conclusion of contract
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. |
/uploadpic/tramaofinal_inserat/bilder/73095/bild1.jpg,/uploadpic/tramaofinal_inserat/bilder/73095/bild2.jpg,/uploadpic/tramaofinal_inserat/bilder/73095/bild3.jpg
