Використані машини: Металоформовочні машини

sheet width 3040 mm
plate thickness 5,00 mm
distance between columns mm
upper beam stroke 300 mm
total power requirement 7,50 kW
weight of the machine ca. 6,50 t

Catalog No. : 6632
Type: HBP 100/10
Producer: Frýdlantské Strojírny
Made in: 2022
Characteristic:
Maximum width of the sheet metal: 2500 mm
Maximum ...

There are 6 baskets full of servomotors available. More detailed list available in the pictures. All servomotors work perfectly. Documentation available. On-site inspection is possible.

There are 3 cabinets full of frequency inverters available. More detailed list available in the pictures. All frequency inverters work perfectly. Documentation available. On-site inspection is ...

Details:
sheet width: 3554 mm
plate thickness: 42 mm
pre-bending: 36 mm
weight of the machine ca.: 49 t
dimensions of the machine ca.: 7.3x2.4x2.5 m

sheet width 2520 mm
plate thickness 15.0 mm
pre-bending capacity 12.0 mm
upper roll diameter ? 295 mm
lower roll diameter ? 295 mm
bending speed 5.2 m/min
work ...

pressure 60 t
chamfer lenght 1500 mm
total power requirement 8,5 kW
weight of the machine ca. 5300 kg
The data for this ad was created with ModulMWS - the software solution of ...

OSTERBERGER CNC – gesteuerte Profil- und Rohrbiegemaschine REPANDUS – R70CNC für anspruchsvolle und präzise Biegearbeiten mit Hohlprofilen und Rohren. Unabhängig vom Material, Aluminium – ...

This Bystronic Xpert 250/4100 Press Brake Machine was built in the year 2016 in Germany and has 17550 hours. The machine has a pressing force of 2500 kN.
General Data
Machine weight: 22400 ...

This EKAL REP-40-200-3 Bending machine was manufactured in the year 1993 in Germany. It is equipped with an EKAL MT-80 control unit.
This is an EKAL pipe end press for forming pipe ends. With ...

This Schröder Fasti 145-18/075 Bending machine was manufactured in the year 2008 in Germany.
General Data
Machine weight: 1920 kg


Machine Benefits
Technical ...

This OSCAM MULTIBEND 16 Bending machine was manufactured in the year 1999 in Italy. It is equipped with a BECKHOFF control unit.
General Data
Measurements width: 2350 mm
Measurements ...

This EHT VarioPress 225-30 Bending machine was manufactured in the year 1997 in the Netherlands.

Machine Benefits
Technical Machine Benefits:
- Crowning & back gauge

This Durma AD-R 30220 Bending machine was manufactured in the year 2012 in Turkiye. The machine has a pressing force of 2200 kN and a bending length of 3050 mm.
General Data
Machine ...

This HACO PPV 30220 Bending machine was manufactured in the year 2007 in Belgium. It is equipped with a HACO ATL 550 control unit. The machine has a pressing force of 2200 kN and a bending length of ...

This Trumpf TrumaBend V85S Bending machine was manufactured in the year 2003 in Austria. It is equipped with a Trumpf control unit and has 4 axis. The machine has a pressing force of 850 kN and a ...

This Tauring Alfa 200 Tube Bending machine was manufactured in the year 2007 in Italy.
General Data
Machine weight: 7550 kg

This RAS 62.30 TURBObend Plus bending machine was made in the year 2004. It is equipped with a Ras CNC 6000 control unit. The machine has a sheet length of 2540 mm and a max. sheet thickness of 2 ...

This ERMAKSAN AP 2100-35 Bending machine was manufactured in the year 2005 in Turkey. The machine has a pressing force of 350 kN.
General Data
Measurements height: 2288 mm

This Ermaksan AP 3100-120 Bending machine was made in 2002 in Turkey. The machine has a pressing force of 1200 kN.
General Data
Measurements width: 2170 mm
Measurements depth: 3400 ...

This Blecken PPE SE-3160 Bending machine was manufactured in the year 2007 in Spain. It is equipped with a Delem ER-70 control unit and has 4 axis. The machine has a pressing force of 1600 kN and a ...

This EHT EHPS 25-30 Bending machine was manufactured in the year 1991. The machine has a pressing force of 2500 kN.
Main drive
Pressing force: 2500 kN

This STAR-BEND STAR 800 CN6/GEN/L Bending machine was manufactured in the year 2006 in Italy. It is equipped with a STAR-BEND control unit and has 6 axis.
Control Unit
Brand: STAR-BEND

This HACO ERM 36150 bending machine was made in the year 2014 and has 1962 hours. It is equipped with a CONTROLLER M8519T control unit. The machine has a pressing force of 150 kN. Robot can be ...

This ERMAK CNCHAP 3600x200 Bending machine was manufactured in the year 2005 in Turkiye. It is equipped with a CYBELEC DNC 60 control unit. The machine has a pressing force of 2000 kN and a bending ...

There are 2 identical SGB transformers available. Theoretical power: 630kVA, peak power: 340kVA, average power: 300kVA. The transformers are only sold as a package deal. Individual machines cannot be ...

Control system - Operateur.
The machine is in good technical condion, under power, after agreement is possible to test it.

Details:
Druckleistung: 220 t
Abkantlänge: ...

Details:
Größte Durchmesser der Biegeröhre: 76 mm
Rohrwandsdicke: 3 mm
Antriebsart bender: Hydraulický
Maschinenabmessungen L x B x H: 7100 x 1200 x 1850 ...

pressure 0050 t
chamfer lenght 2000 mm
distance between columns 1600 mm
throat 400 mm
stroke of the table 100 mm
Control Delem DA58
total power requirement 7 kW

sheet width 2040 mm
plate thickness 1,25 mm
pre-bending
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
Right and left ...

OSTERBERGER KBA3440/3020 - kombinierte CNC – gesteuerte Abkantpresse / Blechtafelschere - fabrikneu, Baujahr 2024 – superkompakte Maschine mit sehr geringem Platzbedarf, größte Schnittlänge ...

Excellent technical condition, it is possible to test it. Controlled axes: Y1, Y2, X1, Z1, X, Z2, R, A1, A2. CNC crowning, FLW sheet follower, AMS angle measurement system, infrared gate, sheet layout ...

The machine is in excellent condition, it can be retested.

Details:
Max. Blechdicke: 3,2 mm
Blechbreite: 1524 mm
Antriebsart bender: Hydraulický
Max. ...

pressure 110 t
chamfer lenght 3110 mm
distance between columns 2690 mm
column arm 420 mm
stroke 200 mm
dayligth 470 mm
working feed 8.0 mm/sec
return speed ...

pressure 175 t
chamfer lenght 3720 mm
distance between columns 3120 mm
stroke of upper beam 265 mm
throat 450 mm
dayligth 530 mm
ajustment speed 140 mm/sec

sheet width 2020 mm
plate thickness 2.0 mm ST
thickness at "Niro-steel" 1.25 mm
bending angle max. 135 ?
stroke of upper beam 120 mm
adjustment UW 25.0 mm
Control ...

sheet width 2050 mm
plate thickness 2.0 mm
daylight opening 145 mm
bending angle max. 135 / 180 ?
adjustment UW 100 mm
work height max. 950 mm
total power ...

Rohrbiegemaschine - Dornbiegemaschine TRACTO-TECHNIK Typ Transfluid DB 2060 K
Serien. Nr. 70173 Baujahr 2004
Biegeleistung (Stahl) max. Ø 76,1 x 3,0 mm
Biegeleistung (Edelstahl) ...

This OTINUS PBO 2312N Bending machines machine was manufactured in 2021. This equipment features the E21 control system with a backgauge along the X-axis and beam adjustment along the Y-axis. It ...

This Durma AD-S 40320 Bending machine was manufactured in the year 2012 in Turkey and has 35040 working hours. It is equipped with a Cybelec ModEva 10S control unit. Contact us anytime for further ...

pressure 125 t
chamfer lenght 3550 mm
distance between columns 2250 mm
throat 300 mm
stroke 240 mm
dayligth 640 mm
quantity of oil 250 l
Control
total ...

pressure 125 t
chamfer lenght 3050 mm
distance between columns 2550 mm
throat 300 mm
stroke 240 mm
dayligth 640 mm
quantity of oil 250 l

total power ...

This TRUMPF TruBend Center 7030 Bending machine was manufactured in the year 2019 and has 901 production hours. Contact us anytime for further questions
General Data
Machine weight: 31000 ...

Machine in good technical condition, plugged, can be tested.

Details:
Max. Blechdicke: 9 mm
Blechbreite: 1550 mm
Anzahl von Biegezylindern: 4
Antriebsart: ...

Machine functional, can be plugged and tested.

Details:
Druckleistung: 90 t
Abkantlänge: 2600 mm
Anzahl der Achsen: 2
Lower Ausgleichsbewegung: nein
Art ...

The machine can be tested in good technical condition. Hydraulic clamping, bending. Automatic shear.

Details:
Max. Blechdicke: 1 mm
Blechbreite: 6000 mm
Antriebsart ...

Machine type: 3-reel round bending machine
Manufacturer: AKYAPAK
Type: ASMY140x2100
Year of construction: 2005
Condition: used/good
"
}, {
...

Machine type: Drawing Machine / Stretching Machine
Manufacturer: JOSEF BÖHM
Machine condition: good
Offer type: used machine

Technical data
Working size: ...

Control Elgo Electric P8822-00-R.

The machine is in good technical condition, under power.

Details:
Druckleistung: 35 t
Abkantlänge: 2100 mm
Anzahl der ...

Control Elgo Electric P8822-00-R.

The machine is in good technical condition, possible to test under power.

Details:
Druckleistung: 120 t
Abkantlänge: 3100 ...