Використані машини: металообробні верстати

VYSOKOTLAKÉ ZAŘÍZENÍ 40 BAR-55 L/MIN PRO CHLAZENÍ OLEJE VČ. ŠROUBOVÉ ČERPADLO KTS32 A FILTRAČNÍ JEDNOTKA FKA/160
ODSÁVAČ OLEJE FILTERMIST S800
UPEVŇOVACÍ STANICE PRO ...

The machine is in good technical condition, under power.

Details:
Presskraft: 25 t
Die Abmessungen des Desktop: 630x450 mm
Max. Stößelhub: 100 mm

sheet width 3200 mm
plate thickness 3,00 mm
distance between columns mm
max. height of upper beam 300 mm
total power requirement 4,5 kW
weight of the machine ca. 4,40 ...

sheet width 3000 mm
plate thickness 6,00 mm
distance between columns mm
opening of the upper cheek 450 mm
opening of the down cheek 125 mm
Opening of the bending cheek ...

0330 mm
210 mm
1000 mm
167 mm
40 mm
2,2 kW
spindle turning speed - stepless 30-3000 U/min
The data for this ad was created with ModulMWS - the software ...

Inv. Num. : 7562
Type: VF2
Produzent: HAAS
Erzeugt: 2006
Parametern:
Steuerungssystem: HAAS AUTOMATION
Arbeitstischlänge: 914 mm

Inv. Num. : 7563
Type: S90/200
Produzent: PINACHO
Erzeugt: 2002
Parametern:
Maximale Drehlänge: 400 mm
Maximaler Drehdurchmesser über Bett: 400 mm

Catalog No. : 7565
Type: 2D450
Producer: STANKO
Made in:
Characteristic:
Length of the working table: 1120 mm
Width of the working table: 630 mm

Catalog No. : 7566
Type: 2D450
Producer: UNION
Made in:
Characteristic:
Length of the working table: 1120 mm
Width of the working table: 630 mm

Catalog No. : 7567
Type: 100 K
Producer: Wemhöner
Made in: 1995
Characteristic:
Pressing force: 5000 kN
Maximum stroke: 1000 mm
Length of the ...

Catalog No. : 5805
Type: -
Producer: EKOL
Made in: 2004
Characteristic:
Suitable for surface coating of aluminium profiles with max. dimensions 3500 x 1350 x 600 ...

Machine type: Turning Machine
Manufacturer: Weiler
Type: Matador VS2
Year of construction:
Condition: used
"
}, {
"translation" : "
** ...

This Bystronic BySprint PRO 3015 Laser Cutting Machine was made in the year 2016 in Switzerland and has 29865 hours, of which 9779 are cutting hours. The machine has a laser power of 4,4 kW. ...

This DMG MORI DMC 1150V Vertical Machining center was manufactured in the year 2015 in Germany. It is equipped with a HEIDENHAIN TNC 640 control unit and has 3 axis. The machine has a spindle speed of ...

This EUMACH SUMO 1400 Vertical Machining center was manufactured in the year 2004. It is equipped with a HEIDENHAIN 426 control unit and has 3 axis. The machine has a spindle speed of 15000 rpm, is ...

This HURCO VMX 60 Vertical Machining center was manufactured in the year 2008. It is equipped with a MAX control unit and has 3 axis. The machine has a spindle speed of 10000 rpm.
Control ...

This WELE AA1165 Vertical Machining center was manufactured in the year 2014 in Taiwan. It is equipped with a Fanuc control unit and has 3 axis. The machine has a spindle speed of 15000 rpm.

This DMG Mori HSC 55 linear Universal Machining Center was manufactured in the year 2011 and has 61913 control hours, 59275 machines on hours, 10986 program run hours, and 10631 Spindle running time ...

This Mandelli Storm 1100 Horizontal Machining center was manufactured in the year 2000 in Italy. It is equipped with a Fanuc 160i-M control unit and has 3 axis. The machine has a spindle speed of ...

This HAAS VF-2 Vertical Machining center was manufactured in the year 2018 in the United States and has 7086 production hours, of which 3019 are cutting hours. It is equipped with a HAAS control unit ...

This TOYODA FH 400 J Horizontal Machining center was manufactured in the year 2014 in Japan and has 36057 production hours. It is equipped with a Fanuc Series 32i-Model A control unit. The machine has ...

This ORLaser LRS EVO 160W laser welding machine was made in the year 2017 in Germany. The machine has a laser power of 160 W. It can be operated with a maximum table load of 350 kg. As for wire ...

This DOOSAN HP 6300 Horizontal Machining center was made in 2007 in Korea. It is equipped with a Fanuc Series 18i-MB control unit.
General Data
Machine weight: 12000 kg

This HERMLE C20U Vertical Machine Center was built in the year 2008. It is equipped with a HEIDENHAIN TNC 530 CNC control unit and has 5 axis. The machine has a spindle speed of 18000 rpm.

This HERMLE C30U Vertical Machine Center was made in the year 2006. It is equipped with a HEIDENHAIN TC 530 control unit and has 5 axis. The machine has a spindle speed of 18000 rpm. There are 2 ...

This HERMLE C20U Vertical Machining center was manufactured in the year 2007. It is equipped with a HEIDENHAIN TNC 530 CNC control unit and has 5 axis. The machine has a spindle speed of 18000 rpm. ...

This Röders TEC RXP 500 Vertical Machining Center was made in 2005 and a general overhaul was made in June 2012, has 52478 hours, of which 21375 are spindle hours. It is equipped with a Röders RMS6 ...

This DMG DMU 40 evo Vertical Machining center was made in 2012 in Germany and has 22398 production hours. It is equipped with a HEIDENHAIN 530 control unit and has 5 axis. The machine has a spindle ...

This DMG DMU 50 evo linear Vertical Machining center was made in 2010 in Germany and has 30651 production hours. It is equipped with a Heidenhain 530 control unit and has 5 axis.
Control Unit

This Tauring Alfa 200 Tube Bending machine was manufactured in the year 2007 in Italy.
General Data
Machine weight: 7550 kg

This RAS 62.30 TURBObend Plus bending machine was made in the year 2004. It is equipped with a Ras CNC 6000 control unit. The machine has a sheet length of 2540 mm and a max. sheet thickness of 2 ...

This DECKEL MAHO DMU60T Vertical Machining center was manufactured in the year 2001. It is equipped with a HEIDENHAIN control unit and has 5 axis. The machine has a spindle speed of 18000 rpm.

This ERMAKSAN AP 2100-35 Bending machine was manufactured in the year 2005 in Turkey. The machine has a pressing force of 350 kN.
General Data
Measurements height: 2288 mm

This Ermaksan AP 3100-120 Bending machine was made in 2002 in Turkey. The machine has a pressing force of 1200 kN.
General Data
Measurements width: 2170 mm
Measurements depth: 3400 ...

This Amada LC 2415 A3 Laser cutting machine was manufactured in the year 2002 in Japan. It is equipped with a Fanuc Series 160i-L control unit. The machine has a laser power of 2,0 kW.
Control ...

This Blecken PPE SE-3160 Bending machine was manufactured in the year 2007 in Spain. It is equipped with a Delem ER-70 control unit and has 4 axis. The machine has a pressing force of 1600 kN and a ...

This HAAS TM2-HE vertical machine center was built in 2007. It is equipped with a Fanuc based control unit and has 3 axis. The machine has an SK 40 taper.
Main drive
Number of axis: 3

This GROB G350 Universal Machining Center was manufactured in the year 2011 and has 54019 hours, of which 17507 are spindle hours. It is equipped with a SIEMENS SINUMERIK 840D control unit. The ...

This CHIRON MILL 2000 Vertical Machining Center was manufactured in the year 2003. It is equipped with a Siemens Sinumerik control unit. The machine has a spindle speed of 12000 rpm.
Control ...

This Makino D500 horizontal machine center was made in the year 2016 in Germany and has 20000 spindle hours. It is equipped with a Makino professional 5 control unit and has 5 axis. The machine has a ...

This ESAB Suprarex SXE-HD 3500 Plasma Cuttting Machine was manufactured in the year 2014 in Germany and has 10 production hours.

Machine Benefits
Qualitative Machine Benefits:

This Unisign Unipro 5P Drilling and Vertical Machining center was manufactured in the year 2004 in Netherlands. It is equipped with a Siemens Sinumerik 840D control unit. The machine has a spindle ...

This Mazak SPACE GEAR-510 Mk II Laser cutting machine was made in 2003 in Japan and has 52204 production hours. It is equipped with a Mazak MAZAK & FANUC L64 control unit. The machine has a laser ...

This CHIRON DZ24 WM HS Vertical Machining center was manufactured in the year 2015 in Germany. It is equipped with a Fanuc Series 31 i – MODEL B5 control unit and has 4 axis. The machine has a ...

This ESAB SXE-P14500 SUPRAREX Plasma Cutting Machine was made in 2008. It is equipped with an ESAB Vision 52 control unit.
Control Unit
Brand: ESAB
Model: Vision 52

This Feeler VMP 30 Vertical Machining center was manufactured in the year 2020 in Taiwan and has 1100 production hours. It is equipped with a Fanuc Series Oi-MF control unit and has 3 axis. The ...

This Brother TC-32BN QT Vertical Machining center was manufactured in the year 2008 in Japan. It is equipped with a Brother CNC INTERFACE UNIT control unit and has 3+2 axis. The machine has a spindle ...

This Okuma MX45-VAE Vertical Machining center was manufactured in the year 1999 in Japan and has 18000 production hours. It is controlled by an Okuma OSP U100M control unit. The machine has a spindle ...

This Deckel Maho DMU 80T Vertical Machining Center was made in 2000 in Germany and has 18361 hours, of which 1849 are spindle hours. It is equipped with a DECKEL MAHO MillPlus control unit and has 3 ...

This MORI SEIKI SH-630 Horizontal Machine Center was built in the year 1998 in Japan and has 15112 power on hours, of which 2000 are cutting hours. It has 4 axis. The machine has a spindle speed of ...